Konrad Technologies Consumer Electronics Icon

Consumer Electronics
Test Solutions

Your test partner for complex Consumer Electronics

Total Test Coverage for All Consumer Electronics Devices

Mobile Phones, Tablets, Wearables

Laptops & Desktops

Heat Consumption Counters

GPS Modules and more

We offer valuable test know-how support throughout every stage of your product's life cycle. Whether it's during the initial phases such as design and prototyping, or the crucial steps of validation and verification, all the way to the seamless integration of new production (NPI) and large-scale manufacturing, repair and ongoing support, we have you covered.

Our Expertise

Micron Level Precision (Assembly & Vision)

Starting in 2000, we developed the first Micro Alignment Application for the consumer market. Since then, we have gained key know-how and experience to implement such solutions at scale.

The Right Technology Mix

At Konrad Technologies, we are highly familiar with all technologies that are integrated in consumer products today and know the right test approach to ensure complete test coverage during production.

Global Team and Support

Mass scaling of consumer product test equipment deployments around the world have been a main factor for the global expansion of Konrad Technologies. Today we have test experts around the globe to help you directly with local support where you need it most.

Test Capabilities

  • Haptic / Button
  • Audio (Microphone / Speaker, headset plugs)
  • RF Signals (Wi-Fi, Bluetooth, NFC, GPS…)
  • Display / Touchscreen / Touchpad
  • Micro Alignment & Fine Pitch contact
  • PCB / PCBA (ICT, FCT, ISP and Boundary Scan)
  • Sim Card
  • Camera
  • Camera Uniformity
  • LED / Flash
  • Others (Battery, Flash, Proximity, Gyro, Ambient Light Sensor, Barometer…)

Solution Examples

Konrad Technologies MCS500 Fine Pitch Contacting System

Fine Pitch Contacting
System Example: MCS500

As consumer products become smaller, the miniaturization of PCB boards poses a challenge as they become harder to test due to limited contact with test fixtures.

To solve this challenge, Konrad Technologies developed a standard Fine Pitch Contacting System that combines rigid needle adapters with a vision inspection system and multi-axis motion control system for a process safe micro-alignment of the devices under test.

System Capabilities:
- Vision Guided Needle Alignment (more about the Alignment System in the Data sheet)
- Upper and Lower Multi Level Contact
- Automated parallel testing possible
- up to 500 Test Points
- Minimum Test Pad Size 150 μm
- 10μm Accuracy, 1μm Resolution
- Process safe contacting of tiny test pads
- Usable on PCBs and LTCC structures
- Usable with Flex PCBs
- Contacting of mini connectors

Applications: ICT, FCT, ISP, IPCB Panel Test, stand-alone or inline use
(Integrated Test System can be provided on request)

Expand
chevron-up
Konrad Technologies RF Signal Production Tester for Wi-Fi, BT, NFC, GPS

RF Signal Production Tester for
Wi-fi, BT, NFC & GPS

To connect consumer products to the smart home and to the internet, RF (Radio Frequency) Signals are integrated in most electric consumer products today. Testing it with a high quality in a production environment is very challenging, especially when validating the antennas, instead of only focusing on electrical tests.

To meet this challenge we have developed a RF Signal Production tester for the most common consumer product RF Applications like Wi-fi, BT, NFC & GPS.

Test System Capabilities:
- Antenna amplifier
- Keyless entry systems
- Wi-fi IEEE 802.11a/b/g/n/ac
- GPS, Bluetooth, Bluetooth LE, GSM, GPR, GFC etc.
- sub 1-GHz proprietary standards
- Simple Go/No-Go tests can be executed in parallel
- RF testing, RF balancing or final testing

Device Communication Interfaces: SPI, I2C, UART and CAN

Our Systems incorporate antenna design from Konrad Technologies as well as professional RF shielding environments.

Expand
chevron-up
Konrad Technologies Haptic Button Universal Test System

Haptic / Button
Universal Test System

Konrad Technologies offers with the Haptics Universal Test System a standardized Flexible haptic test system.

Test System Capabilities:
- Force measurement on the robot head
- Laser-guided test head positioning (+/- 30µm)
- Combined pick & place head
- simple go/no-Go test
- Advanced haptic tests according to specification

This system is very versatile and can be used for consumer device button, as well as touchscreen & touch pad test.

Standard use cases include:
- Prototype validation
- Production test, optimized for speed
- Endurance testing

Expand
chevron-up

Let's talk about
your project!

Let us know what you're working on and how we can help you get there
through our long term experience in large high tech projects.

We can't wait to hear from you!

Talk to us about your project and participate in our long term experience in large high tech projects.

By clicking “Accept All Cookies”, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts. View our Privacy Policy for more information.